Operating   Pressure at Analyzer:

Recommended:

0.95 – 1.1 atm absolute (14.0 – 16.1 psia)

Maximum:

2 atm absolute   (29.4 psia)

Note:   Analyzers are factory calibrated at 1 atm.   For operation at higher pressure special factory calibration is required   which may incur a nominal

fee.

Process Gas   Temperature:

-20 to 60°C

Flow Rate:

0.1 to 10 slpm

Operating Humidity:

< 95% RH (non-

condensing)

Calibration   Interval:

90 days

Output Signals                                                                                  

Analog: 4-20 mA

Serial: RS232 or   RS422

Relays: 5A/240   VAC or 5A/30 VDC

Two programmable   relays and one fault relay

Power                                                                          

Input Voltage

Input Power

90 – 240 VAC, 50 – 60 Hz

15 W

Physical                                                                     

Dimensions

Weight

7.5in (L) x   5.4in (W) x 5.7in(D)

5.9 lbs

Adapter Fitting:   ¾ Inch Union Compression Tee

Environmental                                                                                  

Operating temp:   -20 to 55°C

Storage temp:   -30 to 80°C

Ingress   Protection: IP67